Skip to main content

Bell-Mark EasyPrintIII Thermal Printer Ribbons - Wax, Wax/Resin & Resin

Bell-Mark EasyPrint III thermal transfer printer with 53 mm (2.10") or 128 mm (5.04") near-edge printhead delivers high-speed 300 dpi coding up to 800 mm/sec for flexible packaging applications.

A flexible thermal transfer overprinter designed for intermittent and continuous packaging lines, delivering 300 dpi printing at speeds up to 800 mm/sec (31.50 ips) depending on configuration.

FAQ Overview

Review our FAQ section, size guide, how to choose the right ribbon for your print application, and step by step calibration instruction.

Bell-Mark EasyPrintIII Thermal Printer Datasheet
Ink Side
Coated side in (CSI)
Printer Technology
Thermal Transfer
Print Characteristics
Max Print Width (in)
2.1, 5.0
Print Speed
800 mm/sec (31.50 in/sec) (continuous mode max for 53 mm model)
Ribbon Characteristics
Ribbon Width Range
2.1" , 5.0" (55.3mm, 130mm)
Ribbon Length (feet)
2625' (800 m)
Ribbon Core
1" Core

Thermal Transfer Ribbon Supplies for Bell-Mark EasyPrintIII Thermal Printer Printer

Wolfbarco offers four grades thermal transfer ribbons, general purpose wax, premium wax, wax/resin and resin. It is critical to choose the appropriate grade of ribbon for your printing needs.

Ribbon

Near Edge / TTO
24 Rolls 2.16" x 1968' (55 mm x 600 m) Near Edge Wax /Resin Thermal Transfer Ribbon Coated Side In for Toshiba B-EX6T1 Printers
Ink Side: Inside
Core Size: 1"
$11.76 per roll
Near Edge / TTO
4.17" x 1968' (106 mm x 600 m) Near Edge Wax /Resin Thermal Transfer Over Printer Ribbon for TTO, CSO
Ink Side: Inside
Core Size: 1"
$26.37 per roll

FAQ for Bell-Mark EasyPrintIII Thermal Printer Ribbons

What ribbon sizes are compatible with Bell-Mark EasyPrintIII?

The Bell-Mark EasyPrintIII accepts ribbon widths from 2.1" , 5.0" (55.3mm, 130mm). Choose a ribbon at least 0.5" wider than your labels for optimal coverage.

What types of ribbons work with Bell-Mark EasyPrintIII?

The Bell-Mark EasyPrintIII supports four ribbon types:

  • Wax: Most economical. Best for paper labels and indoor use.
  • Resin-Enhanced Wax: Moisture-resistant for longer-lasting prints with better resistance to abrasion. Can print on both paper and synthetic material.
  • Wax-Resin: Better durability and scratch resistance. Good for synthetic labels.
  • Resin: Maximum durability for harsh environments and polyester labels.

Choose based on your label material and durability needs.

How do I calibrate the Bell-Mark EasyPrintIII?

If your Bell-Mark EasyPrintIII is skipping labels or printing incorrectly, calibration is needed:

  1. Turn off the printer
  2. Press and hold FEED button while turning on
  3. Wait for the status light to flash
  4. Release - the printer will feed labels to calibrate

This teaches the printer to detect label size and gaps. Calibrate when changing label sizes.

I am unsure what to choose.

Contact us for help selecting the best compatible ribbon for your print application. Please let us know the following information so we can provide an informed answer. 

  • Printer brand and model
  • How will the label be used, indoor or outdoor?
  • Exposure to extreme environments, such as freezing temperature, oil and chemicals?