Skip to main content

Videojet Dataflex 6420 Thermal Printer Ribbons - Wax, Wax/Resin & Resin

Videojet DataFlex 6420 thermal transfer overprinter with 53mm or 107mm printhead delivers high-speed flexible packaging coding up to 1000 mm/s, with long ribbon capacity and reliable performance.

A high-performance thermal transfer overprinter for flexible packaging that delivers ultrafast coding with speeds up to 1000 mm/s depending on printhead configuration.

Ink Side
Coated side out (CSO)
Printer Technology
Thermal Transfer
Print Characteristics
Print Speed
Up to 1000 mm/s (53mm printhead, continuous mode)
Up to 800 mm/s (107mm printhead, continuous mode)
Ribbon Characteristics
Ribbon Width Range
2.2" ~ 4.33" (55mm ~ 110mm)
Ribbon Length (feet)
3937' (1200 m)
Ribbon Core
1" Core

Thermal Transfer Ribbon Supplies for Videojet Dataflex 6420 Thermal Printer Printer

Wolfbarco offers four grades thermal transfer ribbons, general purpose wax, premium wax, wax/resin and resin. It is critical to choose the appropriate grade of ribbon for your printing needs.

Ribbon

FAQ for Videojet Dataflex 6420 Thermal Printer Ribbons

What ribbon sizes are compatible with Videojet Dataflex 6420?

The Videojet Dataflex 6420 accepts ribbon widths from 2.2" ~ 4.33" (55mm ~ 110mm). Standard lengths include 3937 meters. Choose a ribbon at least 0.5" wider than your labels for optimal coverage.

What types of ribbons work with Videojet Dataflex 6420?

The Videojet Dataflex 6420 supports four ribbon types:

  • Wax: Most economical. Best for paper labels and indoor use.
  • Resin-Enhanced Wax: Moisture-resistant for longer-lasting prints with better resistance to abrasion. Can print on both paper and synthetic material.
  • Wax-Resin: Better durability and scratch resistance. Good for synthetic labels.
  • Resin: Maximum durability for harsh environments and polyester labels.

Choose based on your label material and durability needs.

How do I calibrate the Videojet Dataflex 6420?

If your Videojet Dataflex 6420 is skipping labels or printing incorrectly, calibration is needed:

  1. Turn off the printer
  2. Press and hold FEED button while turning on
  3. Wait for the status light to flash
  4. Release - the printer will feed labels to calibrate

This teaches the printer to detect label size and gaps. Calibrate when changing label sizes.

I am unsure what to choose.

Contact us for help selecting the best compatible ribbon for your print application. Please let us know the following information so we can provide an informed answer. 

  • Printer brand and model
  • How will the label be used, indoor or outdoor?
  • Exposure to extreme environments, such as freezing temperature, oil and chemicals?