Skip to main content

Printronix T8308e (8", 300 dpi) Ribbons - Wax, Wax/Resin & Resin

The Printronix T8308e is an 8-inch premier industrial thermal transfer printer with an 8.5" (216mm) print width, 300 dpi resolution, and speeds up to 8 IPS. The ultimate wide-format, high-resolution industrial label printer with ODV barcode verification, 625-meter ribbon capacity, and PostScript/PDF support for the most demanding environments.

FAQ Overview

Review our FAQ section, size guide, how to choose the right ribbon for your print application, and step by step calibration instruction.

Ink Side
Coated side out (CSO)
Printer Technology
Thermal Transfer
Direct Thermal
Media Characteristics
Media Core
3" Core
Media O.D.
8.00
Ribbon Characteristics
Ribbon Width Range
3.0" ~ 8.75" (76.2mm ~ 222.2mm)
Ribbon Length (feet)
2051' (625 m)
Ribbon Core
1" Core

Thermal Transfer Ribbon Supplies for Printronix T8308e (8", 300 dpi) Printer

Wolfbarco offers four grades thermal transfer ribbons, general purpose wax, premium wax, wax/resin and resin. It is critical to choose the appropriate grade of ribbon for your printing needs.

Ribbon

Thermal Transfer Ribbon
ZE220-0300DO 8.66" x 984' (220mm x 300m) Premium Wax/Resin Thermal Transfer Ribbon
Ink Side: Outside
Core Size: 1"
$23.46 per roll

FAQ for Printronix T8308e (8", 300 dpi) Ribbons

What ribbon sizes are compatible with Printronix T8308e?

The Printronix T8308e accepts ribbon widths from 3.0" ~ 8.75" (76.2mm ~ 222.2mm). Standard lengths include 2051 meters. Choose a ribbon at least 0.5" wider than your labels for optimal coverage.

What types of ribbons work with Printronix T8308e?

The Printronix T8308e supports four ribbon types:

  • Wax: Most economical. Best for paper labels and indoor use.
  • Resin-Enhanced Wax: Moisture-resistant for longer-lasting prints with better resistance to abrasion. Can print on both paper and synthetic material.
  • Wax-Resin: Better durability and scratch resistance. Good for synthetic labels.
  • Resin: Maximum durability for harsh environments and polyester labels.

Choose based on your label material and durability needs.

How do I calibrate the Printronix T8308e?

If your Printronix T8308e is skipping labels or printing incorrectly, calibration is needed:

  1. Turn off the printer
  2. Press and hold FEED button while turning on
  3. Wait for the status light to flash
  4. Release - the printer will feed labels to calibrate

This teaches the printer to detect label size and gaps. Calibrate when changing label sizes.

I am unsure what to choose.

Contact us for help selecting the best compatible ribbon for your print application. Please let us know the following information so we can provide an informed answer. 

  • Printer brand and model
  • How will the label be used, indoor or outdoor?
  • Exposure to extreme environments, such as freezing temperature, oil and chemicals?